1 copyright ? 2010, everlight all ri ghts reserved. release date : 2 9 - apr .2013 . issue no: dse - 000 7602 rev. 5 www.everlight.com smd ? b 1 6 - 2 1 6/t3d - aq1r2ty/3t fe atures ? package in 8mm tape on 7 diameter reel. ? compatible with automatic placement equipment. ? compatible with infrared and vapor phase reflow solder pro cess. ? mono - color type. ? pb - free. ? the product itself will remain within rohs compliant version. description ? the 1 6 - 2 1 6 smd led is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage sp ace and finally smaller equipment to be obtained. ? besides, lightweight makes them ideal for miniature applications. etc. applications ? b acklighting in dashboard and switch. ? telecommunication: indicator and backlighting in telephone and fax. ? flat bac klight for lcd, switch and symbol. ? general use.
datasheet smd ? b 1 6 - 2 1 6/t3d - aq1r2ty/3t 2 copyright ? 2010, everlight all rights reserved. release date : 29 - apr - 2013 . issue no: dse - 000 7602 rev 5 www.everlight.com device selection guide chip materials emitted color resin color ingan pure white yellow diffused absolute maximum ratings (ta=25 parameter symbol rating unit reverse voltage v r 5 v forwar d current i f 25 ma peak forward current (duty 1/10 @1khz) i fp 100 ma power dissipation pd 110 mw operating temperature t opr - 40 ~ +85 storage temperature tstg - 40 ~ + 90 electrostatic discharge esd hbm 150 v soldering temperature t sol reflow solder ing : 260 for 1 0 sec. hand soldering : 350 for 3 sec. electro - optical characteristics (ta=25 parameter symbol min. typ. max. unit condition luminous intensity iv 72 ----- 180 mcd i f = 5 ma viewing angle 2 1/2 ----- 1 3 0 ----- deg forward v oltage v f 2.6 ---- 3.0 v reverse current i r ----- ----- 5 0 a v r =5v note: 1. tolerance of luminous intensity: 11% 2 . tolerance of forward voltage: 0. 05 v
datasheet smd ? b 1 6 - 2 1 6/t3d - aq1r2ty/3t 3 copyright ? 2010, everlight all rights reserved. release date : 29 - apr - 2013 . issue no: dse - 000 7602 rev 5 www.everlight.com bin range of luminous intensity bin code min. max. unit condition q1 72 90 mcd i f = 5 ma q2 90 112 r1 112 140 r2 140 180 bin range of luminous voltage bin code min. max. unit condition 28 2.6 2.7 mcd i f = 5 ma 29 2.7 2.8 30 2.8 2.9 31 2.9 3.0 note: 1. tolerance of luminous intensity: 11% 2 . tolerance of forward voltage: 0. 05 v chromaticity coordinates specifications for bin grading group bin code cie_x cie_y condition a 1 0.274 0.226 i f = 5 ma 0.274 0.258 0.294 0.286 0.294 0.254 2 0.274 0.258 0.274 0.291 0.294 0.319 0.294 0.286 3 0.29 4 0.254 0.294 0.286 0.314 0.315 0.314 0.282 4 0.294 0.286 0.294 0.319 0.314 0.347 0.314 0.315 5 0.314 0.282 0.314 0.315 0.334 0.343 0.334 0.311 6 0.314 0.315 0.314 0.347 0.334 0.376 0.334 0.343 no tes: 1.the c.i.e. 1931 chromaticity diagram ( tolerance 0.01 ) . 2.the products are sensitive to static electricity and care must be fully taken when handling products.
datasheet smd ? b 1 6 - 2 1 6/t3d - aq1r2ty/3t 4 copyright ? 2010, everlight all rights reserved. release date : 29 - apr - 2013 . issue no: dse - 000 7602 rev 5 www.everlight.com cie chromaticity diagram
datasheet smd ? b 1 6 - 2 1 6/t3d - aq1r2ty/3t 5 copyright ? 2010, everlight all rights reserved. release date : 29 - apr - 2013 . issue no: dse - 000 7602 rev 5 www.everlight.com typical electro - optical c haracteristics curves relative luminous intensity ) ( % 400 25 0 50 75 100 500 600 700 800 spectrum distribution wavelength (nm) ta=25c relative luminous intensity (%) forward current vs. forward voltage ta=25c forward current i (ma) f f forward voltage v (v) forward current luminous intensity vs. ta=25c relative luminous intensity % ) ( luminous intensity vs. ambient temperature forward current i (ma) f radiation diagram ta=25c forward current derating curve ambient temperature ta (c) ambient temperature ta (c) forward current i (ma) f
datasheet smd ? b 1 6 - 2 1 6/t3d - aq1r2ty/3t 6 copyright ? 2010, everlight all rights reserved. release date : 29 - apr - 2013 . issue no: dse - 000 7602 rev 5 www.everlight.com package dimension note: tolerances unless mentioned 0.1mm. unit = mm suggested pad dimension is just for reference only. please modify the pad dimension based on individual need.
datasheet smd ? b 1 6 - 2 1 6/t3d - aq1r2ty/3t 7 copyright ? 2010, everlight all rights reserved. release date : 29 - apr - 2013 . issue no: dse - 000 7602 rev 5 www.everlight.com moisture resistant packing materials label explanation ? cpn: customer s product number ? p/n: product number ? qty: packing quantity ? cat: luminous in tensity rank ? hue: chromaticity coordinates ? ref: forward voltage rank ? lot no: lot number reel dimensions note: the tolerances unless mentioned is 0.1mm ,unit = mm rohs pb cpn : p n : xxxxxxxxxxxxx xxxxxxxxxxxxx qty : xxx lot no : xxxxxxxxxx reference : xxxxxxxx cat : xxx hue : xxx ref : xxx everlight made in taiwan
datasheet smd ? b 1 6 - 2 1 6/t3d - aq1r2ty/3t 8 copyright ? 2010, everlight all rights reserved. release date : 29 - apr - 2013 . issue no: dse - 000 7602 rev 5 www.everlight.com carrier ta pe dimensions: loaded quantity 3 000 pcs per reel note: th e tolerances unless mentioned is 0.1mm ,unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
datasheet smd ? b 1 6 - 2 1 6/t3d - aq1r2ty/3t 9 copyright ? 2010, everlight all rights reserved. release date : 29 - apr - 2013 . issue no: dse - 000 7602 rev 5 www.everlight.com precautions for use 1. over - current - proof customer must apply resistors for protection, otherwise slight voltage shift will cause big curr ent change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package : t he leds should be kept at 30 or l ess and 90%rh or less. 2.3 after opening the package : t he led's floor life is 1 year under 30 or less and 6 0% rh or less. if unused leds remain, it should be stored in moisture proof packages. 2. 4 if the moisture absorbent material (silica gel) ha s faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb - free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board. 4.soldering iron each terminal is to go to the tip of soldering i ron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double - head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of t he leds will or will not be damaged by repairing. pre-heating 150~200 c 60~120sec. above 217 c 60~150sec. 260 c max. 10sec. max. 6 c/sec.max. above255 c 30sec.max. 3 c/sec.max.
datasheet smd ? b 1 6 - 2 1 6/t3d - aq1r2ty/3t 10 copyright ? 2010, everlight all rights reserved. release date : 29 - apr - 2013 . issue no: dse - 000 7602 rev 5 www.everlight.com application restrictions high reliability applications such as military/aerospace, automotive safety/security systems, and medical equipment may require different product. if you have any concerns, please contact everlight before using this product in your application. this specification guarantees the quality and performance of the product as an individual component. do not use this product beyond the specification describe d in this document.
|
